ASTM B117 Programmable Salt Water Fog Spray Corrosion Salt Spray Test Machine

• After-sales Service: Online Technical Guide Istallation Instruction
• Power Supply: AC:220V
• Certification: CE, TUV, ISO
• Warranty: 2 Years
• Circular-Arc Pendulum Tube Radius: 400mm
• Length of Right Angle Swing Pipe: 500mm
• Model NO.: B-SST-120
• Hydraulic Pressure: 50-400kpa
• Air Pressure: 0.2 ~ 0.4MPa
• Spray Pressure: 0.05 ~ 0.17MPa/Cm2
• Transport Package: Strong Wooden Case
• Specification: 178*120*149 CM
• Trademark: BOTO
• Origin: China
• HS Code: 85141090
• Production Capacity: 5000 Sets/Month

Product Description

Product Description

ASTM B117 Programmable Salt Water Fog Spray Corrosion Salt Spray Test Machine

Introduction:
  Salt Spray Tester is used to test the anti-erosion quality of the surface of all materials after the rust-proof of painting, coating, electroplating, anoding and rust-proof of greasing.anti corrosion treatment for a variety of materials, corrosion resistance of their products.

 Salt Spray Tester is an accelerated corrosion test that produces a corrosive attack to the coated samples in order to predict its suitability in use as a protective finish. The appearance of corrosion products (oxides) is evaluated after a period of time. Test duration depends on the corrosion resistance of the coating; the more corrosion resistant the coating is, the longer the period in testing without showing signs of corrosion. Different coatings have different behaviour in salt spray test and consequently, test duration will differ from one type of coating to another.
 
 

Product Parameters

 

Model	BT-60	BT-90	BT-120	BT-160	BT-200
Inner size (cm)	60x45x40	90x60x50	120x100x50	160x100x50	200x100x50
External size(cm)	107x60x118	141x88x128	190x130x140	230x130x140	270x130x140
Inside temp	Brine test method(NSS ACSS)35°C±1°C/Corrosion resistance test method (CASS)50°C±1°C
Brine temp	35°C±1°C 50°C±1°C
Test chamber volume	108L	270L	600L	800L	1000L
Brine chamber volume	15L	25L	40L	40L	40L
Compressed air pressure	1.00±0.01kgf/cm2
Spray volume	1.0~2.0ml/80cm2/h (Collect at least 16 hours, the average)
Test room relative humidity	85%RH or more
PH	6.5~7.2 3.0~3.2
Spray method	Programmable spray (including the continuous spray interrupted spray)
Power	AC220V1Φ10A	AC220V1Φ15A	AC220V1Φ20A	AC220V1Φ20A	AC220V1Φ30A

 

Detailed Photos

Corresponding Standard:
GB11158                   GB10589-89             GB10592-89            GB/T10586-89      GB/T2423.22-2001   GB/T2423.1-2001      GB/T2423.2-2001    GB/T2423.3-93        GB/T2423.4-93     ASTM D1735 
IEC60068-2-1.1990    IEC60068-2-2.1974    IEC 68-2-30           IEC68-2-03          EIA - 364-31C
EIA - 364-59               ASTM B117

 


Product Features
1, Durable hard 8 mm PVC construction, anti-corrosion and easy to clean.
2, Reservoirs with mixing system on stand.
3, Separate heating system apart from salt testing chamber to ensure accurate result and protect circuit.
4, Exposure zone lined with corrosion-resistant PVC sheets.
5, Clear cover allows viewing of test conditions.
6, Peaked cover prevents dripping of condensation onto samples.
7, Water seal and water level protection system.
8, Heated humidifying tower with air relief valve, adjustable tower tip to orient salt fog.
9, Automatic DI water fills to humidifying tower.
10, Digital temperature control.
11, Integral over-protection on heaters.
12, Low water cut-off protection on humidifying tower.

Customer Support Services
Ø Installation
Ø Training (Training customer employees)
Ø Calibration
Ø Preventative maintenance
Ø Replacement parts
Ø Assistance via phone or internet
Ø On-site diagnosis and repair/online diagnosis and repair


Packaging Dimensions: (WxDxH) 1610*1050*1400mm
Power supply source: single-phase, 220V±10%, 50Hz (can be appointed)
Gross Weight: 150kg
HS Code: 8479899990

PACKAGE&DELIVERY:

 

1. Standard exported package: Internal anticollision protection, external export wooden box packaging.

 

2. Shipping by express, by air, by sea according to customers' requirements to find the most suitable way.

 

3. Responsible for the damage during the shipping process, will change the damage part for you for free.

 

4. 15-20days after confirming order,detail delivery date should be decided according to production season and order quantity.

Our Services
During the whole business process, we offer Consultative Selling service.

1. Customer inquiry process:

      Discussing testing requirements and technical details, suggested suitable products to customer to confirm.   Then quote most suitable price according to customer requirements.

1. Specifications customize process:

      Drawing related drawings to confirm with customer for customized requirements. Offer reference photos to show the products appearance. Then, confirm the final solution and confirm final price with customer.

1. Production and delivery process:

      We will produce the machines according to confirmed PO requirements. Offering photos to show production process. 
      After finish production, offer photos to customer to confirm again with the machine. Then do own factory calibration or third party calibration(as customer requirements). Check and test all the details and then arrange packing.
      Deliver the products in confirmed shipping time and inform customer.

1. Installation and after sale service:

      Defines installing those products in the field and providing after-sales support.