Customization: | Available |
---|---|
After-sales Service: | 1 Year |
Power Supply: | 220V/50Hz |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Two Box Type Cold And Hot Shock Test Chamber Thermal Shock Tester Chamber
Introduction
The Two Box thermal shock test chamber, also known as the thermal shock test chamber, is a state-of-the-art testing solution designed to subject materials and products to rapid temperature changes, simulating the thermal shock they may experience in real-world applications. This dual chamber system consists of a high temperature chamber and a low temperature chamber, allowing for rapid switching between extreme high and low temperatures to test the elasticity and performance of various products.
Key Features:
Specification:
Product name | Two box type temperature impact test box | |||||
Product model | BT-2TS100 | BT-2TS180 | BT-2TS300 | BT-2TS1000 | ||
Nominal volume | Unit/L | 100 | 180 | 300 | 1000 | |
Inner size | Width × depth × height (mm) | 500×500×400 | 600×600×500 | 700×700×600 | 1000×1000×1000 | |
External size | Width × depth × height (mm) | 1020×1200×1850 | 1200×1500×1900 | 1350×1600×1980 | 2450×1800×1980 | |
Basket size | Width × depth × height (mm) | 350×350×250 | 450×450×350 | 550×550×450 | 800×800×800 | |
Operating mode | A.vertical basket B. horizontal basket type | |||||
Performance index |
temperature range | A,-75ºC~200ºC B,-90ºC~200ºC C,-120ºC~200ºC | ||||
Impact range | A,-55ºC~160ºC B,-75ºC~160ºC C,-85ºC~160ºC | |||||
Temperature fluctuation | ±0.5ºC | |||||
Temperature uniformity | ≤±2.0ºC | |||||
Temperature deviation | ≤±2.0ºC | |||||
heating rate | RT~+200ºC,≤40Min | |||||
Cooling rate | A,+25ºC~-75ºC,≤60Min;B,+25ºC~-90ºC,≤80Min;C,+25ºC~-90ºC,≤100Min; | |||||
Temperature conversion time | ≤15s | |||||
Temperature recovery time | ≤5Min | |||||
Exposure conditions | High temperature exposure 30Mins; Low temperature exposure 30Mins | |||||
Refrigeration method | Compressor refrigeration | |||||
Cooling method | Air-cooled/water-cooled | |||||
Main components | Control System | Siemens programmable controller + touch screen + independent development program | ||||
Heating system | Fully independent system, high efficiency stainless steel finned tube heater | |||||
Cooling System | Importer-type scroll compressor | |||||
Circulatory system | Temperature and low noise motor, stainless steel centrifugal impeller | |||||
Main materials | Carton material | High-quality carbon steel plate, phosphating electrostatic spray treatment | ||||
Inner box material | International standard SUS304# stainless steel mirror treatment | |||||
Insulation material | Hard flame retardant polyurethane foam | |||||
Sealing material | High and low temperature environment-friendly silicone rubber seal | |||||
voltage | 380±10% VAC,50Hz;3L+N+G | |||||
Communication Interface | RS232 communication interface, USB data interface | |||||
Standard configuration | 1 sample holder, 1 test lead hole, 1 silicone plug | |||||
Optional accessories | Recorder, Remote Control Software, Insulated Sample Holder, Split Manipulator, Dry Air Purge | |||||
safety devices | Leakage, short circuit, motor overheating, heater overheating, humidification, water shortage, compressor overpressure, overload, multiple overtemperature protection | |||||
Environmental requirements |
Ambient temperature: 5 ~ 35 °C, relative humidity: ≤ 85% RH, no strong vibration, electromagnetic radiation, dust and corrosive substances around; Water supply temperature: ≤ 30 °C, water pressure: 0.1 ~ 0.3MPa, water quality meets industrial water standards; |
|||||
Note: 1. temperature performance parameters are in the ambient temperature of 25 °C, studio no load conditions, in accordance with GB/T5170.2-2008 test; 2.according to the specific requirements of users customized non-standard high and low temperature impact test box; 3.This technical information is subject to change without notice. |
FAQ
1. How about packaging? If machine damaged, what should I do ?
Usually machine is packed with wooden case and standard export carton, plywood carton or as your requirement. Damage haven't happened before, if happen, we will arrange replacement.
2. We haven't do business before, how can I trust your company and machine?
We are a factory with more than 13 years and without amy complaints on . and our machine have exported to many countries and have a good feedback.
3. If I want to visit your factory, is the traffic convenient ?
Our company traffic is very convenient, it is only 10 minutes by car or taxi from our city light rail to our company, we also can arrange the shuttle bus for you to our factory.