Environmental Test Chamber Sand and Dust Chamber with Touch Screen

• After-sales Service: 12 Months
• Power Supply: 220V
• Certification: CE, TUV, ISO
• Warranty: 2 Years
• Exterior: Coating or SUS#304stainless Steel Plate
• Interior: SUS#304stainless Steel Plate
• Model NO.: B-SC
• Transport Package: Strong Wooden Case
• Specification: Depends on the model
• Trademark: BOTO
• Origin: China
• HS Code: 85141090
• Production Capacity: 60000ets/Month

Product Description

Sand and dust test Chamber
Introduction:

Sand Dust Test Equipment, large observation window with bright lights to keep the box, and use of tempered glass embedded heating element. Dust test chamber provides testing as per various iec 60529 for ip5x & ip6x. Combination of various testing cycles are available in a completely mono block construction. All settings can be done in an ergonomically designed control panel with accurate and uniform dust agitation.
 
Sand Dust Test Equipment is applied to all mechanic, electric, electronic, electric chemical and mechanical and electric equipments, it is used to evaluate whether equipment can resistivity and storage, running or not in air of dry sand or dust. It is applied to GB 4208-2008, GB/T2423.37-2006 and GJB150.12A-2009...
 
Application: Mainly for shell protection, auto parts (light, instrument, steering system, door locks, etc.), machinery, electrical, electronic, electrochemical and mechanical and electrical equipment , etc.
 

Sand Test Chamber,Dust Chamber Manufacturers XB-OTS-IP65X is according to IEC60529, IEC 60598, GB2423.37-89 (Test L:dust test methods), GB 4208-93 protective casing grade (IP code), GB/T 4942.2-93(protective casing grade of low-voltage apparatus), GB 7000.1-1996, GB 7001-1986(protective casing grade of lamps),DIN40050 and IP5K0. The XB-OTS-IP65X is applied in LED or other luminaries for IP5X and IP6X test.
 
Working principle of chamber:
    Centrifugal fan is the main source of dust movement, the high-speed operation of the fan so that dust into the fan due to the centrifugal force of the role of fan blades into the dust pipe dust. The wind speed of the pipeline is usually more than 7.5m / s (too low wind speed will make the dust precipitate in the pipeline will cause the test tube can not work). The dust line was sprayed from above into the test chamber and passed through the sample at a rate of> 2 m / s. Sand and dust chamber As the lower part of the working box for the funnel, it can precipitate down the dust into the lower part of the 72 × 50um filter. Through the vibrating motor vibration, less than the diameter of the filter hole in the dust and centrifugal fan sucked so back and forth. 
 
Electronic and Control systems:
1. The main controller LCD touch screen, can do programmable test
2. PLC complex man-machine interface control, contrived moving time, rest time and power-on time setting.
3. multiple sets of test procedures can be planned in the interface, and each group can be arbitrarily set the desired action, easy to operate.
4. If a fault occurs in the operation of various signals are written records will be displayed to facilitate maintenance.
5. Touch the setting, digital direct display, all the conditions fully automatic locking by a microcomputer.
6. imported electronic temperature and humidity sensor, not need to cleanup.  

Specification:

Model		BT-500PL	BT-800PL	BT-1000PL	BT-1500PL
Workroom size(D×W×H)mm		800×800×800	800×1000×1000	1000×1000×1000	1000×1500×1000
	Blower Time	1S-99H(optional)
	Vibration time	1S-99H(optional)
	Timing range	0-99H
	Dust dosage	2-4kg/m³
	Dust dimensions	<=32µm33%.32µm-250µm67%
	Mesh Diameter	50um
	Wire Spacing	75um
	Temperature range	25ºC-40ºC
	Pumping time	≤60 times ,Gas volume inner of Hull/hour
	Pressure differential	≤2kPa(20mbar)

 

Customer Support Services
Ø Installation
Ø Training (Training customer employees)
Ø Calibration
Ø Preventative maintenance
Ø Replacement parts
Ø Assistance via phone or internet
Ø On-site diagnosis and repair/online diagnosis and repair

DustProof Test Equipment IEC 60529 Sand Dust Climatic Test Chamber are made for the simulation of dust and sand conditions. These dust test chambers are used to test the exposure of test the exposure of automotive and electronic components under extreme environmental conditions in order to validate product seal.Dust ingress test methods included IEC60529, ISO20653 and many others.
FAQ
1. Do you offer after-sales service? How can I ask for that? And how about the warranty?
Every machine from our factory has a 14-month warranty after shipment. Generally,
we offer 12 months for the FREE maintenance, while considering of sea transportation,
we can extend 2 months for our customers.
If your machine doesn't work, you can send E-mail to us and we will try our best to find
the problem by email or skype video chat if neccesary. After confirmation of the problem,
we can send you new spare parts or provide on-site repair.
 
2. What's the delivery term?
At most of time, we have stock in the factory. If there is no stock, normally, the delivery 
time is 15-20 working days after deposit receipt. If you are in urgent need, we can consider 
making a special arrangement for you.
 
3. Do you accept customization service? Can I have my logo on the machine?
Yes, of course. We can not only offer standard machines, but also customized 
machines according to your requirements. And we can also put your logo on the machine.
4. How to install and use the product?
We will send you operating instructions, English  video by Email. Or you can download on our
officail website directly.
Most of our machine is shipped with a whole part, which means it is already installed, all you
need to do is to connect the power cable and start to use.  And if possible, we can also install
your machine at site.
Work shop: