Environmental Test Chambers Salt Spray Corrosion Test Chamber B-Sst-90 Lab Equipment

• Customization: Available
• After-sales Service: One Year
• Warranty: One Year
• Model NO.: B-SST-90
• Certification: CE
• Material: Special Plastic
• Hatching Rate: 98%
• Use Voltage: 220V-240V
• Package: Wooden Case
• Transport Package: Sea Ship, Air Ship
• Specification: Medium
• Trademark: BOTO
• Origin: China
• Production Capacity: 5000 Months/Mouth

Product Description

Environmental Test Chambers Salt Spray Corrosion Test Chamber B-SST-90 Lab Equipment

Features

The overall molding, corrosion resistance, shock, easy to clean and no leakage.

Tower spray system, the salt spray is uniformity and the settling volume is adjustable.

PVC or FRP cover could be optional, using PVC cover could clearly see the test samples and spraying situation in working chamber.

Water seal structure and no salt spray overflow.

The circuit control board and other components are fixed the location which is easy to check and maintain.

Control system

P.I.D Microprocessor temperature controller ensures a precise and reliable control, the resolution is ±0.1ºC .

Universal type: With domestic digital controller.

All circuits are equipped with circuit breakers and all heaters are equipped with overheating protection devices, Thedistribution

box is made of refractory resin.

Continuous or periodic spray optional and dual over-temperature protection, which is safe and reliable.

Safety Alarm

With electric leakage, overload protection.

With short circuit, shortage of water, over-temperature alarm.

Environmental Test Chambers Salt Spray Corrosion Test Chamber B-SST-90 Lab Equipment

 

Introduction:

Salt Spray Tester is used to test the anti-erosion quality of the surface of all materials after the rust-proof of painting, coating, electroplating, anoding and rust-proof of greasing.anti corrosion treatment for a variety of materials, corrosion resistance of their products.

Corresponding Standard:

GB11158 GB10589-89

GB10592-89

GB/T10586-89

GB/T2423.22-2001

GB/T2423.1-2001

GB/T2423.2-2001

GB/T2423.3-93

GB/T2423.4-93

ASTM D1735

IEC60068-2-1.1990

IEC60068-2-2.1974

IEC 68-2-30

IEC68-2-03

EIA - 364-31C

EIA - 364-59

ASTM B117

 

operational approach:

1. Install the internal parts of the salt spray test chamber: tower spray device, funnel, round rod, V-shaped sample rack, etc.

2. Connect the air source, turn on the power switch after the power supply is connected.

3. Add water in the pressure barrel and the box, stop adding water after the two low water level lights are off, and add water to seal the sealing groove.

4, the purified water and sodium chloride salt in a ratio of 1:20. Pour the prepared solution into the test inlet (turn off the light of low salt water).

product description:

 

Model		B-SST-60	B-SST-90	B-SST-120	B-SST-160	B-SST-200
Internal Dim(W*H*D)		60x45x40	90x60x50	120x100x50	160x100x50	200x100x50
External Dim(W*H*D)		108x63x119	140x80x139	178x120x149	230x130x149	270x130x159
Cabinet Material		Corrosion-resistant polymer material
Laboratory temperature (ºC)		A:25ºC~70ºC B:0ºC-70ºC C:-20ºC-70ºC D:-40ºC-70ºC
Saturated air barrel temperature(ºC)		35±1ºC50±1ºC Saline test method:35±1ºC/Corrosion test method:50±1ºC
Saturated air pressure (kg/c)		0.8-2.0±0.01
(ml/80c.h) Salt spray sedimentation rate (ml/80c.h)		1-2ml/80 cm2.h(Controllable)
PH value		Salt water test method:6.5~7.2/Test method for corrosion resistance:3.0-3.2 Saline test method:6.5-7.2/Corrosion test method:3.0-3.2
Power Source		AC:220V 50Hz/AC:380V 60Hz