Environment test equipment Walk-IN Temperature And Humidity Test Chamber/Testing Room
Product features:
Step-in high and low temperature test box is a necessary test equipment in the new energy industry. It can carry out high temperature, low temperature, temperature cycle, rapid temperature change, high and low temperature alternating humidity and heat test according to IEC60068, MIL-STD-81OF, GJB150A, GB2423 and other standards. Its characteristics are as follows:
1.It can adopt integral structure or combination of reservoir plate units, the content area can be arbitrarily expanded and easy to disassemble and assemble
2.The insulating layer adopts high-strength polyurethane (PU) foaming and high-density glass fiber cotton, which can avoid energy loss
3.Multilayer filtration and water replenishing device and automatic water replenishing device. There is no need for manual water addition and automatic water scarcity protection.
4.Cases are equipped with test holes, which can be used for external test power lines or signal lines;
5.Modular refrigeration units can ensure manufacturing quality, and maintenance and replacement are very convenient;
6.Low temperature and continuous effective operation for0°C 1000 hours without frost, and temperature does not return. Rise.
Technical specification
Thermal cyclic chamber
chamber with internal air circulation, and all the heaters and cooling coil located behind/below the false sheet of the chamber and outside the working space
interior
the conditioning with air circulation to maintain uniform temperatur
interior have provision for arranging stainless steel
Insulation
insulation is asbestos-free csc-free, with low thermal conductivity, polyrthene pu foam
Cooling system
cascade type, refrigeration system with hermetically sealed refrigeration
cycles with environment and ozone friendly and chloride free refrigeration
Door
lockable front opening, with double door latch easy to open
with silicon gasket for perfect sealing
Viewing window
viewing interlock is sealed to avoid leakage and provided with heating provision to prevent condensation
Illumination
inernallight on viewing windows with external control
Temperature measuring and control system
the temperature measuring and control system adopts microprocessor system and provided with touch panel for monitoring and digital display:
supplied with support software
software is capable to visualize and graphical anallyse the measured & recorded value.
graphical representation and digital display and control of set and actual values
digital input and display of temperature in degree centigrade
Fault diagnosis system
120 stroage of programmes
have adjustable safety cut-out against high and low temperature
facility to programme temperature measuring using sensor pt100
Recorder & pc connectivity
standard rs -232 interface for pc connectivity
rs-232 cable for pc connectivity along with pc connectivity software
Port holes
each port hole provided with silicon sealing bunker (plug)
Electrical panel
all power connectors, protection devices power control logic built in the control panel integrated to the chamber
all electrical cables tagged with id number
all electrical function circuit equipped with its own safety device that shuts down the relevant circuit or the entire test chamber if a faulty develops
all electrical systems comply with recognized technical regulation as well as with the accident prevention regulations.
Standard protection
protective feature to be provided as follows:
over load trip & earth leakage trip for complete chamber
over load trip for compressors, heaters and motors
over temperature cut-off for compressors
heater be cut off, if air circulation blowers are off
Operating system
detailed operating & maintanance manual
operational instruction
complete list parts
preventive maintenance procedure
trouble shooting measures
electrical circuit diagrams
Specifications
| Product model |
BT-E705-7-1 |
| temperature range |
-50C TO +100C |
| humidity range |
40% TO 98% RH |
| dimension (internal) (w x d x h) |
1500 X 1500 X 3000 MM |
| dimension (external) (w x d x h) |
2850 X 1700 X 3200 MM |
| ramp |
variable, temp. 0~5c / min & humidity 0~5%/min
in average, no load |
| accuracy |
temp. ±1c, humidity ±2.5%rh |
| interior walls |
stainless steel 304 |
| exterior walls |
cold rolled stell plate with baking finish |
| temperature & humidity measurement and controller |
32 bit control and monitoring system.
interface facility with rs232
programmable temp. humid. controller |
| viewing window |
multi pane glass window size |
| port holes |
50 mm diameter for wire routing |
| power supply requirement |
three phase, ac380 v ± 10 %, 50 hz |
| sound pressure level |
<72DB (A) |
| condenser cooling |
water cooled |
PRODUCT DEAILS
Production Process
Company Profile
BOTO GROUP is a professional manufacturer of various kinds of testing equipment over 20 years. BOTO products are widely used in paper products, packaging, ink printing, adhesive tapes, bags, footwear, leather products, environment, toys, baby products, hardware, electronic products, plastic products, rubber products and other industries, and applicable to all scientific research units, quality inspection institutions and academic fields.
BOTO deals with customers from more than 150 countries and regions. Meanwhile, we are committed to cooperate with different dealers in different countries and regions in order to offer better service. Our mission is to help every customers establish testing labs to ensure the quality of their products.
Our company will continue to develop, innovate and keep faith. We combine with the international testing standards and the specific demands of customers that may establish a new banner in Chinese testing industry.
Main equipment
- Constant Temperature and Humidity Test Chamber
- Salt Spray Test Chamber / Corrosion Cyclic Salt Spray Test Chamber
- UV Accelerated Aging Test Chamber
- Mini Environmental chamber / Desktop Environmental Test Chamber
- Walk in Constant Temperature and Humidity Lab
- High Temperature Chamber and Other Lab Test Equipment etc.
CERTIFICATIONS
The certificate is valid until June 17, 2024
The factory has the ability to calibrate, and the customer can also designate a ISO 17025 accredited third-party organization to calibrate and issue a calibration report.
Cooperative partners
OUR TEAM
PACKAGING AND SHIPPING
Audited Supplier 
){kind=link}
){kind=link}