GB/T10586-2008 Temperature Humidity Test Chamber Programmable High Temperature Chamber

• After-sales Service: 12 Months
• Certification: CE
• Warranty: 1 Year
• Hatching Rate: 98%
• Use Voltage: 220V-240V
• Material: Special Plastic
• Model NO.: B-T-225(A~E)
• Package: Wooden Case
• Transport Package: Sea Ship, Air Ship
• Specification: Medium
• Trademark: BOTO
• Origin: China
• Production Capacity: 5000 Months/Mouth

Product Description

GB/T10586-2008 Temperature Humidity Test Chamber Programmable High temperature chamber GB/T10586-2006

 

Product introduction

A temperature humidity test chamber is a piece of equipment used to simulate different environmental conditions such as temperature and humidity. It is commonly used in the manufacturing industry to test the durability and reliability of various products under different environmental conditions.

The chamber is designed to maintain a specific temperature and humidity level, which can be programmed and controlled by the user. The temperature and humidity can be set to different levels, depending on the requirements of the test.

The chamber typically consists of a sealed chamber, a temperature control system, and a humidity control system. The sealed chamber is made of a durable material such as stainless steel or aluminum and is insulated to prevent heat loss or gain.

The temperature control system consists of a heating and cooling system that maintains the desired temperature level within the chamber. The humidity control system consists of a humidifier and dehumidifier that maintain the desired humidity level.

Some temperature humidity test chambers also have additional features such as a programmable controller, data logging capabilities, and alarms to alert the user if the temperature or humidity levels deviate from the set parameters.

Features
High performance and quiet operation (65 dBa)
Space-saving footprint, designed for flush installation to wall
Stainless steel exterior
Full thermal break around doorframe
One 50mm (2") diameter cable port on left, with flexible silicone plug(special requirement)
Three levels of overheat protection, plus overcool protection
Easy lift-off service panels, electrical access on left
Detachable eight-foot power cord with plug
Direct water supply connection for continuous operation (supply tank optional)
ETL listed electrical panel conforming to UL 508A

Standard

Test B: High temperature test method

GJB 150.3-1986 High temperature test

IEC68-2-2

Test B: dry heat. GB 11158 "High temperature test chamber technical conditions"

GB10586-1 "Humidity and heat test chamber technical conditions"

GB/T 2423.2 "Basic Environmental test procedures for Electrical and electronic products

Test B: high temperature test method".

GB/T 2423.3 "Basic environmental test procedures for Electrical and electronic products

Test Ca: Constant humid heat test method". Wait for...

The test standard to which the machine meets

ASTM F2825:Standard Specification for Climate Stress of Single-Package Shipping Packaging Systems

ASTM D6944:Standard Practice for Determining Thermal Cycling Resistance of Cured Coatings

ASTM D2126:Standard Test Method for Heat and Moisture Aging Response of Rigid Foams

MIL-STD-810G:High and low temperature testing part;Damp heat testing part

MIL-STD-202F: High and low temperature testing part;Damp heat testing part

Model:

(Model)	dry heat	B-T-120(A~E)	B-T-225(A~E)	B-T-504(A~E)	B-T-1000(A~E)
	damp and hot	B-T-120(A~E)	B-T-225(A~E)	B-T-504(A~E)	B-T-1000(A~E)
Internal Dim		45x60x45	60x75x50	70x90x80	100x100x100
External Dim(W*H*D)		75X189X110	90X177X130	100X180X103	130X190X123
Relative Humidity		20%~98%RH(10%~98%RH)
heat-up time		About3~5ºC/min
Pull down time		About0.7~1ºC/min
Temp Fluctudtiont		±0.5ºC
Temp Uniformity		±1.0ºC
Temp&Humi.Deviation		±1.0ºC/±3.0ºCRH
Interior		SUS#304Stainless steel plate
Exterior		Coating or SUS#304Stainless steel plate
Power Source		AV:220V/380V 50/60Hz
power(KW)		2KW~6.5KW	2.5KW~7KW	3KW~8KW	4KW~10KW